The McCabe® RESETTABLE Bi-metal Fire Link saves you time and money because it's RESETTABLE vs. the conventional fusible link that expires after testing.

• Replacement is not required to comply with UL, NFPA and local codes for periodic or continuous cycle safety system components testing.
• The McCabe® Link can provide heat detection signaling and operations.
• You only need one McCabe® Link per application. It can be operated repeatedly - just manually click to reset it.
• Nuisance tripping is reduced by the built-in delay.

THERMAL and THERMAL ELECTRIC McCabe® RESETTABLE FIRE LINKS FEATURE:

• Resettable permanent replacement for Fusible Links.
• Always resettable after repeated testing – including routine system cycles or NFPA required periodic testing for safe functioning operating tests during inspection.
• Depending on the specific unit, the McCabe® RESETTABLE Bi-metal Fire Link can be operated (repeatedly) three ways: Heat, Manually or Electrically.
• In Dire Fire (Thermal) operation, the McCabe® RESETTABLE Bi-metal Fire Link is faster acting than the UL maximum standard for fusible links.
• Self-protection link circuitry. The McCabe® RESETTABLE Bi-metal Fire Link is “Off” when the standard “S” Hook is disengaged.
• Nuisance tripping is reduced by delayed operation (15-45 seconds vs. UL standard of 1 minute).
• Positive mechanical operation.
• Corrosion resistant Bi-metal, zinc coated steel and encased parts.
• McCabe® RESETTABLE Bi-metal Fire Links are environmentally friendly.